Installation of the DeeZee Tailgate Assist Custom Lowering System on a 2013 Ford F-150, http://www.etrailer.com/tglift-2013_Ford_F-150.htm
Today in our 2013 Ford F150, well be installing the DeeZee Tailgate Assist Custom Tailgate-Lowering System for pickup trucks part number DZ43200.Lets begin by showing you how the tailgate can just simply drop when you release it. To begin with, we need to adjust the nutsert tool so that theres approximately three quarters of an inch from the washer to the head of the bolt. If you need to move it, you simply loosen the nut and screw the bolt in or out to get to the proper length and then tighten down the nut. As you can see here, weve already got our three quarter inch length set properly.Next, were going to use an M5 Allen wrench, as well as a 10-millimeter wrench to install the nutsert in the opening in the tailgate pivot point. When installing this, were going to need to turn the nut 360 degrees nine times. To make things a little bit easier, were going to take our paint marker and mark one side of the nut so that we can keep count as were turning the nut in tighter.
Note: Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information..
 |
| Installation of the DeeZee Tailgate Assist Custom Lowering System on a 2013 Ford F-150 |
Download Video
0 Response to "Installation of the DeeZee Tailgate Assist Custom Lowering System on a 2013 Ford F-150"
Post a Comment